IEC Flange-Mounted EMB Spring-Set Motor Brakes, Metric (8)

The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors. This power-off brake is ideal for use in cycling, emergency stopping and holding applications. Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications. Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes.

NEMA Flange-Mounted EMB Spring-Set Motor Brakes, Inch (9)

The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors. This power-off brake is ideal for use in cycling, emergency stopping and holding applications. Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications. Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes.

FMBES Spring Engaged, Flange Or Foot Mount Brakes (16)

Spring-engaged for holding in power-off conditions. Self-adjusting for friction material wear. Totally eliminates the necessity to shut down for periodic adjustments. No special requirements or additional parts for vertical-mounted applications. Air-released, greater heat-sink capacity for cooler, more reliable performance. Ideal for high-cycle applications. Nickel-plated and sealed for water protection per NEMA standard 1.26.55 (IP54).

Spring Engaged Flange Mounted Friction Brakes (18)

Spring-engaged brakes provide protection to equipment when fast, dependable stops are required for non-cyclic applications. Restrictor valve controls exhaust air during engagement, ensuring a smooth stop. 3 moving parts insure durability and dependability. Mounting flexibility–NEMA C-Flange mount or Shaft mount capability. Not intended for vertical mount. No dynamic thrust load on bearings when unit is engaged. No thrust load, or virtually no radial load, when unit is disengaged and motor is running.

NEMA Flange-Mounted Friction Brakes (9)

These Spring Set Brakes provide high torque in a compact unit. Static Torque capacity up to 1800 In-lbs. Maximum Operating Speed up to 3600 rpm. Bore sizes up to 1.875 inches. Thermal Horsepower rating up to 0.450. Designed to mount directly to NEMA “C” faced double shafted electric motors. CANNOT BE VERTICALLY MOUNTED. Order Brake and Hub separately.

FMBS Spring Engaged, Flange Or Foot Mount Brakes (3)

Spring-engaged for holding in power-off conditions. Self-adjusting for friction material wear. Totally eliminates the necessity to shut down for periodic adjustments. No special requirements or additional parts for vertical-mounted applications. Open design for better heat dissipation providing cooler, more reliable performance. Ideal for high-cycle applications.