MDB Modular Clutch-Brakes (5)

MDB Modular Clutch-Brakes are ideal for more demanding applications. They offer more torque and open design offers higher thermal ratings. Flange mounts directly to NEMA C-face motors up to 10 HP and reducers. Offers true neutral position (no clutch or brake engagement). A drip proof sealing kit is available for wet applications. Optional Foot Mount and Input Units are available for belt, chain, and coupling, drive applications. In high cycle rate applications where the MDB is connected to a reducer that would use the smaller 625 & 875 sizes the FMCBE clutch brake series with the Locking Key feature should be considered due to potential output shaft key or keyway problems.

FMCBE Clutch-Brakes with Locking Key Feature (16)

FMCBE Flange Mounted Clutch-Brakes are designed for controlled starts and stops in hostile, dirty environments. Totally enclosed design prevents contaminants from interfering with operation of the units while keeping worn friction material from escaping into the environment. Fitted with a locking key system designed to eliminate keyway damage while providing positive connection for maximum torque in blind bore applications. Locking Key system available in sizes 0.625 and 0.875 inch.

FMCBE Clutch-Brakes with Integral Valve (22)

Simplified; one product number for a clutch-brake combination, control valve and locking key feature. Reduced number of air line connections for quicker install. Shorter air lines for better air pressure. Eliminates need for quick exhaust valves. 115 Volt is standard on FMCBE. The Integral Valve is available for 12, 24 and 115 volt systems. Flange mounts directly to motors and reducers. Compatible with C-face motors up to 2 HP.

BISSC Clutch-Brakes (44)

Available in electroless nickel plating. Flange or Foot mount capability, Optional Input Unit available, Double acting piston design prevents overlap of clutch and brake functions. BISSC (Baking Industry) certified models, in 0.625 and 0.875 bores available for use in “cleanroom."

FMCBES Spring Engaged Clutch-Brakes (29)

FMCBES Flange Mounted Clutch-Brakes come with a spring engaged brake and air engaged clutch. For applications where safety is a concern, this unit will engage the brake in the event of air pressure loss. All units available in either electroless nickel plating or black oxide coating. Meets NEMA standard 1.26.5 (IP54) for waterproof machines. Flange mounts directly to motors and reducers. Compatible with C-face motors up to 1.5 HP.

DAP Spring Engaged Clutch-Brakes (2)

DAP Flange Mounted Clutch-Brakes come with a spring engaged brake and air engaged clutch. For applications where safety is a concern, this unit will engage the brake in the event of air pressure loss. Open design provides high thermal dissipation rating. Flange mounts directly to motors and reducers. Compatible with C-face motors up to 1.5 HP.

Power Capsul (5)

The Power Capsul is a foot mounted air or hydraulic engaged oil bath heavy duty clutch-brake. The oil bath quickly caries heat away from the friction interfaces giving a high thermal performance while reducing wear. It is fully enclosed so ideal for adverse environments. Five sizes are available and capable of up to 40 hp or 4400 inlbs. Thermal dissipation ratings up to 1.75 hp. The three largest models include a cooling circuit that can be connected to an external cooling system to boost thermal performance up to 6.4 hp.