BD Caliper Brakes, Air Actuated (1)

Air actuated actuators mount on either side of the brake. Air connections can be rotated 360 degrees around actuator axis. Multiply stopping power by installing more than one caliper brake per disc. Shoes are mounted with detent pins for quick replacement. Caliper spacing fits 0.500 inch wide discs. SPC shoes fit on BD Model Caliper Brakes for longer life and higher peak input rate. All pivot points have life lubricated bearings. Disc Speeds up to 3200 rpm with 14 inch discs. QD Bushing compatible, for shaft sizes to 3.875 inch.

BD Caliper Brakes, Spring Actuated and Air Released (2)

Spring-actuated actuators mount on either side of the brake and air connections can be rotated 360 degrees around actuator axis. Multiply stopping power by installing more than one caliper brake per disc. Shoes are mounted with detent pins for quick replacement. SPC shoes fit on BD Model Caliper Brakes for longer life and higher peak input rate. All pivot points have life lubricated bearings. Optional discs from 12 to 24 inch diameters. QD Bushing compatible, for shaft sizes up to 3.875 inches

Hydraulic Caliper Brakes, Spring Engaged (1)

Spring Actuated Actuators mount on either side of the brake. Hydraulic connections can be rotated 360 degrees around actuator axis. Shoes are mounted with detent pins for quick replacement. SPC shoes fit on BD Model Caliper Brakes for longer life and higher peak input rate. All pivot points have life lubricated bearings. Optional discs from 12 to 24 inch diameters. Disc Speeds up to 3200 rpm with 14 inch discs. QD Bushing compatible, for shaft sizes up to 3.875 inches

BC Caliper Brakes, Air Engaged (2)

BC Model Caliper Brakes provide static torque capacity up to 8800 In. Lbs. @ 80 psi with 24 inch disc. Air actuated caliper spacing is adjustable to fit 0.188 to 1.500 inch wide rotating discs and linear traveling devices. Optional discs available from 16 to 24 inch diameter. Disc Speeds up to 2800 rpm. QD Bushing compatible for shaft sizes up to 3.875 inches. Disc must be ordered separately. QD Bushing is customer furnished. Check with the QD Bushing manufacturer for bushing torque ratings.

TC Caliper Brakes (1)

TC Models - 3 coefficients of friction facings. Diaphragm actuated, spring returned brake for tension control or low cyclic duty applications.

DBSE Caliper Brakes, Spring Engaged (7)

Torque capacity up to 1200 in-lbs. with a 16" Disc. Brake torque may be doubled or tripled by adding brake calipers. Arc contoured shoe provides large friction area for greater facing life and stability. Mounts in any position with a “T” Bracket. Disc Speeds up to 4500 rpm. Disc Hubs use QD Bushing “SK” for shaft sizes from 0.5 to 2.125 inches/Standard Keyway. Spring return eliminates disc drag when disengaged. The Disc and Hub are ordered separately. QD Bushing is customer furnished.

DB Caliper Brakes, Air Actuated (2)

Torque capacity up to 1200 in-lbs. with a 16" Disc. Brake torque may be doubled or tripled by adding brake calipers. Arc contoured shoe provides large friction area for greater facing life and stability. Mounts in any position with a “T” Bracket. Disc Speeds up to 4500 rpm. Disc Hubs use QD Bushing “SK” for shaft sizes from 0.5 to 2.125 inches/Standard Keyway. Optional Air Hose Assembly comes with required fittings and hose for both air inlets. The Disc, Hub and Air Hose are ordered separately.

BC Caliper Brakes, Spring Engaged (8)

Static torque capacity up to 5300 In. Lbs. with 24 inch disc, Spring Actuated, Caliper spacing is adjustable to fit .188 to 1.500 inch rotating discs and linear traveling devices. Optional discs available from 16 to 24 inch diameter. Disc Speeds up to 2800 rpm. QD Bushing compatible, for shaft sizes up to 3.875 inches. Adjustable shoe provides greater facing life. Spring engaged with manual release. Facing adjustment allows full torque capacity throughout facing use.

Spring Engaged VC500 Caliper Brakes (2)

Spring-actuated braking and clamping force for demanding industrial machinery. A torque rating 4785.9 Nm [42,350 in-lb] is maintained throughout the life of the friction facing. Release pressure at 4.1 bar [60 psi]. Spring actuated for safety. Long cycle life; rear linkage design actually increases clamping force as the facings wear. A high-performance unit compact in size to fit into tight spaces on automotive conveyor systems, large converting machines, saw mills, and many other applications. 80% smaller than older models.