Enter Keyword or Product/Model Number

Back to Top

?
00A7200
MBU Modular Flange Or Foot Mounted Brakes (2)

MBU Modular Brake Units mount directly to NEMA C-faced motors or brakes, or with the input unit and feet be free standing foot mounted. The MBU's provide high torque and their open design offers the highest thermal performance. The MBU's have combined double and single row output shaft bearings providing the the highest overhung load capability. An optional drip-proof kit can allow it's use in wet or very dirty environments.
ProductModelDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
935203MBU-1125MBU-1125,HCO182TC, 184TCn/a1.125 in.n/a
935200MBU-1125MBU-1125182TC, 184TCn/a1.125 in.n/a


01A3000
NEMA Flange-Mounted EMB Spring-Set Motor Brakes, Inch (1)

The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors. This power-off brake is ideal for use in cycling, emergency stopping and holding applications. Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications. Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes.
ProductDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
965300EMB-1125 MOTOR BRAKE 182/184182TC, 184TC660 inlbs1.125 in.48 psi


03A2700
FMBES Spring Engaged, Flange Or Foot Mount Brakes (1)

Spring-engaged for holding in power-off conditions. Self-adjusting for friction material wear. Totally eliminates the necessity to shut down for periodic adjustments. No special requirements or additional parts for vertical-mounted applications. Air-released, greater heat-sink capacity for cooler, more reliable performance. Ideal for high-cycle applications. Nickel-plated and sealed for water protection per NEMA standard 1.26.55 (IP54).
ProductDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
827360FMBES-1125CC*420 IN LBS182TC, 184TC420 inlbs1.125 in.60 psi


04A2800
Spring Engaged Flange Mounted Friction Brakes (3)

Spring-engaged brakes provide protection to equipment when fast, dependable stops are required for non-cyclic applications. Restrictor valve controls exhaust air during engagement, ensuring a smooth stop. 3 moving parts insure durability and dependability. Mounting flexibility–NEMA C-Flange mount or Shaft mount capability. Not intended for vertical mount. No dynamic thrust load on bearings when unit is engaged. No thrust load, or virtually no radial load, when unit is disengaged and motor is running.
ProductDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
808242SE-500-1*1.125 BORE,SPCLn/a240 inlbs1.125 in.30 psi
808241SE-500-1*1.125 BORE,SPCL182TC, 182TC1150 inlbs1.125 in.30 psi
808200SE-500-1*1.125 BORE182TC, 182TC575 inlbs1.125 in.30 psi




LiveZilla Live Chat Software