Enter Keyword or Product/Model Number

Minimum Release Pressure : 50 psi

 

Back to Top

?
02A3000
NEMA Flange-Mounted EMB Spring-Set Motor Brakes, Inch (1)

The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors. This power-off brake is ideal for use in cycling, emergency stopping and holding applications. Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications. Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes.
ProductDescriptionBore SizeMinimum Release Pressure
964939EMB-625-NEMA 56C,SPCLn/a50 psi


04A2800
Spring Engaged Flange Mounted Friction Brakes (5)

Spring-engaged brakes provide protection to equipment when fast, dependable stops are required for non-cyclic applications. Restrictor valve controls exhaust air during engagement, ensuring a smooth stop. 3 moving parts insure durability and dependability. Mounting flexibility–NEMA C-Flange mount or Shaft mount capability. Not intended for vertical mount. No dynamic thrust load on bearings when unit is engaged. No thrust load, or virtually no radial load, when unit is disengaged and motor is running.
ProductDescriptionBore SizeMinimum Release Pressure
805941SE-100-1*0.625 BORE,SPCL0.625 in.50 psi
806003SE-200-1*0.750 BORE,NSB0.750 in.50 psi
806000SE-200-1*0.875 BORE0.875 in.50 psi
806002SE-200-1*0.875 INPUT,0.875 OUTPUT0.875 in.50 psi
806001SE-200-1*20MM BORE,NSB20 mm50 psi