Enter Keyword or Product/Model Number

Back to Top

NEMA Flange-Mounted EMB Spring-Set Motor Brakes, Inch (1)

The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors. This power-off brake is ideal for use in cycling, emergency stopping and holding applications. Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications. Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes.
ProductDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
964914EMB-625-NEMA 56C56C398 inlbs0.625 in.80 psi

FMBES Spring Engaged, Flange Or Foot Mount Brakes (5)

Spring-engaged for holding in power-off conditions. Self-adjusting for friction material wear. Totally eliminates the necessity to shut down for periodic adjustments. No special requirements or additional parts for vertical-mounted applications. Air-released, greater heat-sink capacity for cooler, more reliable performance. Ideal for high-cycle applications. Nickel-plated and sealed for water protection per NEMA standard 1.26.55 (IP54).
ProductDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
827326FMBES-625CC*100 IN LBS,SPCLn/a100 inlbs0.625 in.30 psi
827325FMBES-625CC*200 IN LBS,SPCLn/a200 inlbs0.625 in.30 psi
827323FMBES-625CC*100 IN LBS56C100 inlbs0.625 in.30 psi
827320FMBES-625CC*200 IN LBS56C200 inlbs0.625 in.30 psi
827321FMBES-625EM*200 IN LBSn/a200 inlbs0.625 in.30 psi

Spring Engaged Flange Mounted Friction Brakes (2)

Spring-engaged brakes provide protection to equipment when fast, dependable stops are required for non-cyclic applications. Restrictor valve controls exhaust air during engagement, ensuring a smooth stop. 3 moving parts insure durability and dependability. Mounting flexibility–NEMA C-Flange mount or Shaft mount capability. Not intended for vertical mount. No dynamic thrust load on bearings when unit is engaged. No thrust load, or virtually no radial load, when unit is disengaged and motor is running.
ProductDescriptionMinimum Static Brake TorqueBore SizeMinimum Release Pressure
805900SE-100-1*0.625 BORE56C100 inlbs0.625 in.40 psi
805941SE-100-1*0.625 BORE,SPCL56C225 inlbs0.625 in.50 psi