Enter Keyword or Product/Model Number

Back to Top

?
01G1700
Flange Mount ISO Pinions (Nickel Plated Steel) (1)

Roller Pinions are used with RPS rack and gear sets. The rollers are bearing supported for very low friction and long lives. Nickel plating on the body offers some corrosion resistance. The ISO9409 flanging makes reducer selection and pinion installation easier, provides a more rigid system, and allows the use of Nexen preloaders.
ProductModelDescriptionRack LengthPositional AccuracyRepetitive Positioning PrecisionMaximum SpeedPilot SizeFinish
966837RPS4014RPS4014P-BISO125.00MMP3,SPCLn/a± 30 µm± 5 µm6.0 m/s"ISO-9409 Inner Pilot11.995 mm, See Gearhead Fitment Table In Technical Data Sheet In Left Column""Nickel Plated Steel Body, Zinc-Nickel Plated Bearing Cups, Bare Steel Rollers"


01G1501
Racks, Premium (Coated Steel) (2)

RPS Premium grade rack is the highest performing rack model. It has the highest positional accuracy, moderate corrosion resistance and can run without lubrication if the speeds are under 30 m/min.
ProductDescriptionRack LengthPositional AccuracyRepetitive Positioning PrecisionMaximum SpeedPilot SizeFinish
966694RPS4014R-B1000P2U1000 mm± 30 µm± 5 µm6.0 m/sn/aThin Dense Hard Chrome On Steel
966695RPS4014R-B0520P2U520 mm± 30 µm± 5 µm6.0 m/sn/aThin Dense Hard Chrome On Steel


02G1701
Flange Mount ISO Pinions (Stainless Steel W/WO Thin Dense Hard Chrome) (1)

Roller Pinions are used with RPS rack and gear sets. The rollers are bearing supported for very low friction and long lives. A stainless steel body offers higher corrosion resistance. Some provide thin dense hard chrome over the stainless steel for the highest corrosion resistance.
ProductDescriptionRack LengthPositional AccuracyRepetitive Positioning PrecisionMaximum SpeedPilot SizeFinish
966700RPS4014P-BISO125.0MMP3n/a± 30 µm± 5 µm6.0 m/s"ISO-9409 Inner Pilot11.995 mm, See Gearhead Fitment Table In Technical Data Sheet In Left Column""Nickel Plated Steel Body, Zinc-Nickel Plated Bearing Cups, Bare Steel Rollers"


02G0800
Shaft Mount ISO Pinions (Nickel Plated Steel) (2)

Roller Pinions are used with RPS rack and gear sets. The rollers are bearing supported for very low friction and long lives. Nickel plating on the body offers some corrosion resistance.
ProductDescriptionRack LengthPositional AccuracyRepetitive Positioning PrecisionMaximum SpeedPilot SizeFinish
966824RPS4014P-B055.00MMP3n/a± 30 µm± 5 µm6.0 m/sn/a"Nickel Plated Steel Body, Zinc-Nickel Plated Coupling And Bearing Cups, Zinc Plated Fasteners, Bare Steel Rollers"
966693RPS4014P-B060.00MMP3n/a± 30 µm± 5 µm6.0 m/sn/a"Nickel Plated Steel, Zinc-Nickel Plated Coupling And Bearing Cups, Zinc Plated Fasteners, Bare Steel Rollers"


02G1401
Racks, Standard (Uncoated Steel) (2)

RPS Standard grade rack offers high positional accuracy and zero backlash. This product offers no corrosion resistance and must be periodically lubricated.
ProductDescriptionRack LengthPositional AccuracyRepetitive Positioning PrecisionMaximum SpeedPilot SizeFinish
966646RPS4014R-B1000S1U1000 mm± 50 µm± 10 µm6.0 m/sn/aUncoated Steel
966647RPS4014R-B0520S1U520 mm± 50 µm± 10 µm6.0 m/sn/aUncoated Steel


03G2900
Racks, Endurance (Coated Steel) (1)

RPS Endurance grade rack offers good positional accuracy and zero backlash. It also has some corrosion resistance and can be run without lubrication if speeds are less than 30 m/min.
ProductDescriptionRack LengthPositional AccuracyRepetitive Positioning PrecisionMaximum SpeedPilot SizeFinish
966855RPS4014R-B1000E1U1000 mm± 80 µm± 20 µm6.0 m/sn/aNitrided




LiveZilla Live Chat Software