WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 801748 Product Family TL 20-A
Air Engaged Torque Limiter
Description
TL20A*0.875 BORE,AIR,LESS MICRO SWITCH,SPCL
Product Features
Air Engaged, Shaft Mount, Straight Bore, Single Position
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: No Overload Sensor Or Mounting Hardware For One , Some Overload Detection Method Required To Prevent Premature Failure And Voiding Of Warranty
- Positional Reengagement Torque Is Approximately 10% Of Clutch Torque Being Generated Based On Applied Air Pressure
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 16 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 35/40T, 40/30T, 50/24T, 60/21T |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 1, @ 360° |
| Max Speed | 1800 RPM |
| Drive Inertia | 13.54 lbin² |
| Shaft Inertia | 6.05 lbin² |
| Backlash | 0.38 ° |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | 2 Set Screws at 90 Degrees, Both Ends |
| Unloaded Output Drag Torque | 18 inlb |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 15 psi |
| Inlet Size | 0.125 NPT |
| Hose Length | 8.25 in |
| Housing Type | Open |
| Bore Style | Machined Bore with Keyway |
| Clutch Air Chamber Volume When New | 0.780 in³ |
| Materials Of Construction | Bare Machined Aluminum Air Chamber Black Oxide Pilot |
| Sensor 1 Type | N/A |
| Min Disengagement Torque | 210 inlb |
| Max Disengagement Torque | 860 inlb |
Dimensions
| Length | 5.28 in |
|---|---|
| Outer Diameter | 4.56 in |
| Pilot Size | 2.874 in |
| Bore Size | 0.875 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Input Keyway | 0.189 in Square |
| Output Bolt Circle Diameter | 3.562 in |
| Output Bolt Hole Size | 6 0.313-18 in, Holes @ 60° |
Notes
| Product Features | Air Engaged, Shaft Mount, Straight Bore, Single Position |
|---|---|
| Restrictions | Consult Nexen For Engagement at Differential Speeds |
Required Components
