WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 801817 Product Family TL 15-A
Air Engaged Torque Limiter
Description
TL15A*0.625 BORE,AIR,NO SWITCH
Product Features
Air Engaged, Shaft Mount, Straight Bore, Single Position
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: No Overload Sensor Included But Hardware For One Is, Some Overload Detection Method Required To Prevent Premature Failure And Voiding Of Warranty
- Positional Reengagement Torque Is Approximately 10% Of Clutch Torque Being Generated Based On Applied Air Pressure
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 9 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 25/45T, 35/30T, 40/24T, 50/20T |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 1, @ 360° |
| Max Speed | 2000 RPM |
| Drive Inertia | 6.76 lbin² |
| Shaft Inertia | 1.48 lbin² |
| Backlash | 0.58 ° |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | 2 Set Screws at 90 Degrees, Pilot End Only |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 15 psi |
| Inlet Size | 0.125 NPT |
| Hose Length | 8.25 in |
| Housing Type | Open |
| Bore Style | Machined Bore with Keyway |
| Clutch Air Chamber Volume When New | 0.450 in³ |
| Materials Of Construction | Bare Machined Aluminum Air Chamber Black Oxide Pilot |
| Sensor 1 Type | N/A |
| Min Disengagement Torque | 40 inlb |
| Max Disengagement Torque | 365 inlb |
Dimensions
| Length | 4.42 in |
|---|---|
| Outer Diameter | 3.69 in |
| Pilot Size | 2.249 in |
| Bore Size | 0.625 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Input Keyway | 0.189 in Square |
| Output Bolt Circle Diameter | 2.75 in |
| Output Bolt Hole Size | 6 #10-32 in, Holes @ 60° |
Notes
| Product Features | Air Engaged, Shaft Mount, Straight Bore, Single Position |
|---|---|
| Restrictions | Consult Nexen For Engagement at Differential Speeds |
Required Components
