WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 801905 Product Family TL 10-A
Air Engaged Torque Limiter
Description
TL10A*0.625 BORE,AIR,NP
Product Features
Air Engaged, Shaft Mount, Straight Bore, Single Position
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Nickel Plated But Open, Contaminates Can Still Enter Unit And Cause Problems
- Application Considerations: Now Improved With Turck™ Proximity Sensor (Click User Manual In Left Column For Installation Details)
- Positional Reengagement Torque Is Approximately 10% Of Clutch Torque Being Generated Based On Applied Air Pressure
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 9 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 25/45T, 35/30T, 40/24T, 50/20T |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 1, @ 360° |
| Max Speed | 2000 RPM |
| Drive Inertia | 6.76 lbin² |
| Shaft Inertia | 1.48 lbin² |
| Backlash | 0.58 ° |
| Primary Finish | Nickel Plated |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | 2 Set Screws at 90 Degrees, Pilot End Only |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 15 psi |
| Inlet Size | 0.125 NPT |
| Hose Length | 8.25 in |
| Cable Length | 2 m |
| Number of Sensors | 1 |
| Housing Type | Open |
| Bore Style | Machined Bore with Keyway |
| Clutch Air Chamber Volume When New | 0.450 in³ |
| Materials Of Construction | Nickel Plated |
| Sensor Function | Disengagement |
| Sensor 1 Function | Disengagement |
| Sensor 1 Output | Normally Open PNP |
| Sensor 1 Type | Inductive Proximity |
| Min Disengagement Torque | 25 inlb |
| Max Disengagement Torque | 185 inlb |
Dimensions
| Length | 4.42 in |
|---|---|
| Outer Diameter | 3.69 in |
| Pilot Size | 2.249 in |
| Bore Size | 0.625 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Input Keyway | 0.189 in Square |
| Output Bolt Circle Diameter | 2.75 in |
| Output Bolt Hole Size | 6 #10-32 in, Holes @ 60° |
Notes
| Product Features | Air Engaged, Shaft Mount, Straight Bore, Single Position |
|---|---|
| Restrictions | Consult Nexen For Engagement at Differential Speeds |
Required Components
