WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 802974 Product Family TL 60AC-E
Air Engaged Enclosed Torque Limiter
Description
TL60AC-E*1.750 BORE,AIR,NO SWITCH
Product Features
Air Engaged, Shaft Mount, Straight Bore, Single Position, Clamp Collar, Enclosed
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special Without Over Load Sensor
- Positional Reengagement Torque Is Approximately 10% Of Clutch Torque Being Generated Based On Applied Air Pressure
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 49 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 40/48T, 50/38T, 60/32T, 80/25T, 100/21T |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 1, @ 360° |
| Max Speed | 1000 RPM |
| Drive Inertia | 165.89 lbin² |
| Shaft Inertia | 71.00 lbin² |
| Backlash | 0.23 ° |
| Primary Finish | Nickel Plated |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| IEC IP Rating | IP55 |
| Bore Details | Straight |
| Input Shaft Securement | Clamp Collar |
| Engagement Position Hunting Torque | 1082 inlb, @ 80 psi/165 inlbs @ 15 psi. |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 15 psi |
| Inlet Size | 0.250-18 NPTM |
| Hose Length | 8.25 in |
| Housing Type | Enclosed |
| Bore Style | Machined Bore with Clamp Collar and Keyway |
| Clutch Air Chamber Volume When New | 2.620 in³ |
| Materials Of Construction | Nickel Plated |
| Sensor 1 Type | N/A |
| Min Disengagement Torque | 1650 inlb |
| Max Disengagement Torque | 10820 inlb |
Dimensions
| Length | 6.91 in |
|---|---|
| Outer Diameter | 8.41 in |
| Pilot Size | 5.250 in |
| Input Bore Min Shaft Insertion | 3.00 in, From Pilot End |
| Bore Size | 1.750 in, Machined Bore with Clamp Collar and Keyway |
| Bore Size | Machined Bore with Clamp Collar and Keyway |
| Input Keyway | 0.376 in |
| Output Bolt Circle Diameter | 6.125 in |
| Output Bolt Hole Size | 6 0.500-13 in, Holes @ 60° |
Notes
| Product Features | Air Engaged, Shaft Mount, Straight Bore, Single Position, Clamp Collar, Enclosed |
|---|---|
| Restrictions | Consult Nexen For Engagement at Differential Speeds |
Required Components
