WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 806662 Product Family MW
Air Engaged Through Shaft Mount Clutch
Description
MW*1.625,PILOT MOUNT W/SPROCKET
Product Features
Air Engaged, Keyed, Straight Bore, Shaft Mount
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special With Bolts That Go Through The Back Side Of Pilot/Drive Flange And Thread Into #40/32T Sprocket To Achieve A Smaller Sprocket That Normally Possible, Created For Alba
- Can Be Configured As A DRIVING Shaft Mounted Clutch-Brake With Disc And Caliper Listed Under Accessories In Left Column
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 28.5 lbs |
|---|---|
| Output Type | Chain Sprocket, #40/32T Sprocket |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Max Speed | 1800 RPM |
| Shaft Inertia | 63.28 lbin² |
| Backlash | 0.36 ° |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Max Static Clutch Torque | 975 inlb |
| Clutch Facing Type | Standard Coefficient |
| Clutch Facing Edge Color Code | Red |
| Approximate Clutch Facing Life | 1225 hphr |
| Clutch Facing Effective Area | 30.63 in² |
| Max Clutch Continuous Thermal Dissipation | 0.75 hp |
| Clutch Heat Sink Capacity | 110000 ftlb |
| Clutch Peak Thermal Input Rate | 27.60 hp |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 5 psi |
| Inlet Size | 0.125 NPT |
| Bore Style | Machined Bore with Keyway, Nexen Adapter Bushing Required |
| Clutch Air Chamber Volume When New | 0.644 in³ |
| Clutch Air Chamber Volume When Worn Out | 2.000 in³ |
| Materials Of Construction | Black Oxide |
| Output Shaft Style | None |
Dimensions
| Length | 7.31 in |
|---|---|
| Outer Diameter | 8.06 in |
| Input Bore Min Shaft Insertion | 3.75 in, From Pilot End Full From Air Chamber End |
| Bore Size | 1.625 in, Machined Bore with Keyway, 1.000-1.500 in with Optional Adapter Bushings |
| Bore Size | Machined Bore with Keyway, 1.000-1.500 in with Optional Adapter Bushings |
Notes
| Product Features | Air Engaged, Keyed, Straight Bore, Shaft Mount |
|---|---|
| Restrictions | This Clutches Bore Can Be Reduced With The Bushings Found In Accessories To The Left |
Required Components
