WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 813300 Product Family LWHS
Air Engaged Shaft End Mount Clutch
Description
LWHS*1.125,2'A' GRV,04.40 PD
Product Features
Air Engaged, Straight Bore, Shaft End Mount, Rotary Air Union, Sheave Output
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: This Product Is No Longer Available And Closest Functional Replacement Is The L-600 Product Number 805250
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 0 lbs |
|---|---|
| Output Type | V-Belt Pulley, 2-A, 4.40 in PD Sheave |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Max Speed | 3600 RPM |
| Drive Inertia | 29.52 lbin² |
| Shaft Inertia | 33.34 lbin² |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| Bore Details | Straight With Keyway And 2 Setscrews |
| Max Static Clutch Torque | 370 inlb |
| Clutch Facing Type | Standard Coefficient |
| Clutch Facing Edge Color Code | Red |
| Approximate Clutch Facing Life | 572 hphr |
| Clutch Facing Effective Area | 18.62 in² |
| Max Clutch Continuous Thermal Dissipation | 0.40 hp |
| Clutch Heat Sink Capacity | 60000 ftlb |
| Clutch Peak Thermal Input Rate | 16.80 hp |
| Min Engagement Pressure | 5 psi |
| Inlet Size | 0.250 NPT |
| Clutch Air Chamber Volume When New | 0.327 in³ |
| Clutch Air Chamber Volume When Worn Out | 0.855 in³ |
| Materials Of Construction | Black Oxide |
| Output Shaft Style | None |
Dimensions
| Length | 8.88 in |
|---|---|
| Outer Diameter | 6.00 in |
| Bore Size | 1.125 in, 0-1.0 in With Bushings |
| Bore Size | 0-1.0 in With Bushings |
Notes
| Product Features | Air Engaged, Straight Bore, Shaft End Mount, Rotary Air Union, Sheave Output |
|---|---|
| Restrictions | Do Not Use A Bore Reducing Bushing Above 1800 RPM |
Required Components
