WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 835163 Product Family TCC 14
Multi-Caliper Tension Clutch Housing
Description
TCC14-6*ROTOR-HOUSING,1.938
Product Features
Air Engaged, Straight Bore, Shaft Mount, Pilot Output, Multiple Actuators, High Thermal Capacity, Housing Only
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special 6 Caliper Position Housing With Rotor Combination, Requires Calipers, Facings, And Rotary Air Union
- Application Considerations: High Thermal Dissipation With Multiple Calipers For Precise Tension Control
- This Clutch Can Be Converted To A Shaft Mounted Brake With The Torque Arm Listed In Accessories To The Left
- Other Shaft Sizes Possible With Bushings From MW/S800 Series Brakes, Length & Key & Set Screw Provisions Will Not Be An Exact Match And May Require Some Modification
- Purchase Disc, Calipers, Facings, And Rotary Air Union Separately
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 109 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 50/40T, 60/34T, 80/26T, 100/21T |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Max Speed | 1200 RPM |
| Drive Inertia | 10.54 lbft² |
| Shaft Inertia | 1298.88 lbin² |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | 3, 0.375-16 Set Screws @ 120° |
| Max Dynamic Torque | 5100 inlb |
| Clutch Facing Type | Low, Standard, Or High, See Facing Kits Under Accessories |
| Clutch Facing Effective Area | 16.06 in² |
| Max Clutch Continuous Thermal Dissipation | 9.60 hp |
| Clutch Heat Sink Capacity | 998000 ftlb |
| Clutch Peak Thermal Input Rate | 32.00 hp, Per Caliper |
| Max Number Of Calipers | 6 |
| Min Torque With 1 Ultra-Low Coefficient Caliper | 6 inlb, @ 1 psi |
| Max Torque With 1 Ultra-Low Coefficient Caliper | 400 inlb, @ 80 psi |
| Min Torque With 1 Low Coefficient Caliper | 6 inlb, @ 1 psi |
| Max Torque With 1 Low Coefficient Caliper | 400 inlb, @ 80 psi |
| Min Torque With 1 Standard Coefficient Caliper | 9 inlb, @ 1 psi |
| Max Torque With 1 Standard Coefficient Caliper | 660 inlb, @ 80 psi |
| Min Torque With 1 High Coefficient Caliper | 12 inlb, @ 1 psi |
| Max Torque With 1 High Coefficient Caliper | 850 inlb, @ 80 psi |
| Max Dynamic Torque Low Coefficient | 2400 inlb |
| Max Dynamic Torque Standard Coefficient | 3960 inlb |
| Max Dynamic Torque High Coefficient | 5100 inlb |
| Direction Of Rotation | Bidirectional |
| Max Operating Pressure | 85 psi |
| Min Engagement Pressure | 1 psi |
| Inlet Size | 0.125 NPT, Or 5/32 in Plastic Tubing |
| Bore Style | Machined Bore with Keyway, Nexen Adapter Bushing Required |
| Clutch Air Chamber Volume When Worn Out | 1.25 in³, Per Caliper Pair |
| Materials Of Construction | Black Oxide Housing And Disc Bare Cast Aluminum Calipers |
| Output Shaft Style | None |
Dimensions
| Length | 13.65 in |
|---|---|
| Outer Diameter | 17.50 in |
| Pilot Size | 5.250 in |
| Bore Size | 1.937 in, Machined Bore with Keyway, 1.000-1.750 in with Optional Adapter Bushings |
| Bore Size | Machined Bore with Keyway, 1.000-1.750 in with Optional Adapter Bushings |
| Input Keyway | No Keyway |
| Output Bolt Circle Diameter | 6.25 in |
| Output Bolt Hole Size | 4 0.500-13 in, Holes @ 90° |
| Disc Thickness | 2.06 in |
| Disc Diameter | 14 in |
Notes
| Product Features | Air Engaged, Straight Bore, Shaft Mount, Pilot Output, Multiple Actuators, High Thermal Capacity, Housing Only |
|---|---|
| Restrictions | Order Proper Number Of Calipers To Maintain Assembly Balance |
Required Components
