WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 837464 Product Family VC 500
Spring Engaged Caliper Rail Brake
Description
VC500,VECTOR BRAKE,SPCL
Product Features
Spring Engaged, Low Precision, Dynamic Stops
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special Configured For Linear Braking, Has Sealed Actuator, BD Rectangular Shoes, Quick Exhaust Valve, And Disengagement Sensor
- Application Considerations: Spring Engaged, Dynamic Stops, High Holding Force
- Works On 1/2 in Thick Angle Iron Or Steel Plate
- Can Be Manually Released
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 108 lbs |
|---|---|
| Engagement Method | Spring |
| Release Method | Air |
| Backlash | 0.076 in |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Acrylic Paint |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Brake Facing Type | High Coefficient |
| Brake Facing Edge Color Code | Purple |
| Approximate Brake Facing Life | 547 hphr |
| Brake Facing Effective Area | 15.7 in² |
| Brake Peak Thermal Input Rate | 77.00 hp |
| Clamping Force | 5800 lbf, @ 0 psi |
| Max Operating Pressure | 120 psi |
| Min Release Pressure | 60 psi |
| Inlet Size | 0.250 NPT |
| Cable Length | 5 m |
| Input Power | 10-30 VDC |
| Sensor Connector | M12 x 1.0, 4 Pin AP6X |
| Number of Sensors | 1 |
| Linear Holding Force | 4073 lbf |
| Brake Air Chamber Volume When New | 2.750 in³ |
| Brake Air Chamber Volume When Worn Out | 38.600 in³ |
| Materials Of Construction | Black Acrylic Paint |
| Sensor Function | Disengagement |
| Sensor 1 Function | Disengagement, Integral, factory set |
| Sensor 1 Output | Normally Open PNP |
| Sensor 1 Type | Inductive Proximity |
Dimensions
| Length | 19.2 in |
|---|
Notes
| Product Features | Spring Engaged, Low Precision, Dynamic Stops |
|---|---|
| Restrictions | Only For Vertical Braking Surfaces Due To Lack Of Centering Features To Prevent Dragging |
| Braking Capability | Cyclic Dynamic, E-Stop, Holding |
Required Components
