WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 907211 Product Family 5H 60
Air Engaged Tooth Clutch
Description
5H60-1*2.000 BORE,BASIC,SPCL
Product Features
Air Engaged, Spring Released, Flange Mount, Non-Positioning
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special For And Proprietary To Burke Porter, Air Chamber Has 3 Anti Rotation Provisions @ 90° Relative To The Air Inlet, Can Only Be Purchased From LH Flaherty
- Application Considerations: Flange Should Be Mounted To Another Bearing Supported Element Or Rigid Plate If Used As A Holding Brake
- If Mounting A Pulley, Sprocket, Coupling, Or Putting Moment Loads On Output See The 5H##P Series
- When The Clutch Engages An Up To 1.0° Shaft To Output Flange Rotational Displacement Can Occur As The Teeth Self Align
- Most Common Use Is As A Holding Brake, Often In Assembly And Fixturing Applications
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 29 lbs |
|---|---|
| Mounting Style | Shaft |
| Anti Rotation Style | Flange |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 183 |
| Max Speed | 2400 RPM |
| Drive Inertia | 92.66 lbin² |
| Shaft Inertia | 25.80 lbin² |
| Backlash | 0.23 ° |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | 2, 0.250-20 Set Screws @ 90° |
| Max Static Clutch Torque | 12450 inlb |
| Min Static Clutch Torque | 3110 inlb |
| Max Allowable Pressure | 120 psi |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 20 psi |
| Air Chamber Volume | 1.450 in³ |
| Inlet Size | 0.125-27 NPTM |
| Hose Length | 8.25 in |
| Positioning | Non-Positioning |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Machined Aluminum Air Chamber Black Oxide Drive Flange |
| Output Configuration | Flange |
Dimensions
| Length | 4.55 in |
|---|---|
| Outer Diameter | 7.62 in |
| Bore Size | 2.000 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Output Bolt Circle Diameter | 6.812 in |
| Output Bolt Hole Size | 4 0.375-18 in, Holes @ 90° |
Notes
| Product Features | Air Engaged, Spring Released, Flange Mount, Non-Positioning |
|---|---|
| Restrictions | No Radial (Pulley, Sprocket), Or Moment Loads Allowed On Output Flange, Consult Nexen For Use In Cyclic Applications Or Engagement At Differential Speeds (Not Recommended) |
Required Components
