WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 910126 Product Family 5H 35-SE
Spring Engaged Tooth Clutch
Description
5H35SE*20MM BORE,8 SPRING,NSB
Product Features
Spring Engaged, Air Released, Flange Mount, Non-Positioning
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Inch Unit With Metric Bore
- Application Considerations: Flange Should Be Mounted To Another Bearing Supported Element Or Rigid Plate If Used As A Holding Brake
- If Mounting A Pulley, Sprocket, Coupling, Or Putting Moment Loads On Output See The 5H##P Series
- When The Clutch Engages An Up To 1.7° Shaft To Output Flange Rotational Displacement Can Occur As The Teeth Self Align
- Most Common Use Is As A Holding Brake, Often In Assembly And Fixturing Applications
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 17.13 lbs |
|---|---|
| Mounting Style | Shaft |
| Anti Rotation Style | Flange |
| Engagement Method | Spring |
| Release Method | Air |
| Number Of Engagement Positions | 106 |
| Max Speed | 3200 RPM |
| Backlash | 0.35 ° |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | 2, M5-0.8 Set Screws @ 90° On Air Chamber End Only |
| Max Static Clutch Torque | 1480 inlb |
| Max Operating Pressure | 80 psi |
| Min Release Pressure | 45 psi |
| Air Chamber Volume | 0.492 in³ |
| Inlet Size | 0.125-27 NPTM |
| Hose Length | 8.25 in |
| Positioning | Non-Positioning |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Machined Aluminum Air Chamber Black Oxide Flange |
| Output Configuration | Flange |
Dimensions
| Length | 3.49 in |
|---|---|
| Outer Diameter | 6.13 in |
| Pilot Size | N/A |
| Bore Size | 20 mm, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Input Keyway | 6W x 6H x 88.7L mm |
| Output Pilot Height | N/A |
| Output Bolt Circle Diameter | 4.187 in |
| Output Bolt Hole Size | 4 0.250-20 in, Holes @ 90° |
Notes
| Product Features | Spring Engaged, Air Released, Flange Mount, Non-Positioning |
|---|---|
| Restrictions | Consult Nexen For Use In Cyclic Applications, Engagement At Differential Speeds, Or Use As A Brake |
Required Components
