WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 910255 Product Family 5H 45P-SE-E
Spring Engaged Tooth Clutch
Description
5H45PSE-E*35MM BORE,PILOT,METRIC,SPCL
Product Features
Spring Engaged, Air Released, Pilot Mount, Non-Positioning, Enclosed
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special With Nickel Plating Only On The Hub (Bore), The Rest Is Black Oxide
- Positional Reengagement Torque Is Approximately 10% Of Clutch Torque Being Generated Based On Applied Air Pressure
- The Enclosure Seal On Outer Housing Can Generate Up To 200°F When New Depending On The 5HP-E Size And RPM. Time To Break In And Temperature To Drop Will Vary With Application.
- Nexen Does Not Offer Couplings For Metric 5H's, See Inch 5H's With A Metric Bore
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 31.2 lbs |
|---|---|
| Min Sprocket Size | 40/36T, 50/30T, 60/26T, 80/20T |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 137 |
| Max Speed | 1200 RPM |
| Drive Inertia | 116.59 kgcm² |
| Shaft Inertia | 39.53 kgcm² |
| Backlash | 0.28 ° |
| Open Or Enclosed Design | Enclosed |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 0 °C |
| Max Ambient Temperature | 66 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| IEC IP Rating | IP55 |
| Bore Details | Straight |
| Max Static Clutch Torque | 554 Nm |
| Min Static Clutch Torque | 139 Nm |
| Max Operating Pressure | 6.0 bar |
| Min Engagement Pressure | 1.4 bar |
| Air Chamber Volume | 31.414 cm³ |
| Inlet Size | 0.250-18 BSPTM |
| Hose Length | 222 mm |
| Positioning | Non-Positioning |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Nickel Plated Hub The Rest Is Black Oxide |
| Output Configuration | Pilot |
Dimensions
| Bore Size | 35 mm, Machined Bore with Keyway |
|---|---|
| Bore Size | Machined Bore with Keyway |
| Output Bolt Circle Diameter | 120 mm |
| Output Bolt Hole Size | 4 M6-1.00 mm, Holes @ 90° And 60° |
Notes
| Product Features | Spring Engaged, Air Released, Pilot Mount, Non-Positioning, Enclosed |
|---|---|
| Restrictions | Consult Nexen For Use In Cyclic Applications Or Engagement At Differential Speeds |
Required Components
