WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 910257 Product Family 5H 45-SE
Spring Engaged Tooth Clutch
Description
5H45-SE,40MM BORE,NSB
Product Features
Spring Engaged, Air Released, Flange Mount, Non-Positioning
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special Inch Unit With Metric Bore, No Shaft Securement Provisions, Collars, Step Shaft, Or Snap Ring Grooves, Required To Lock Unit Into Position
- Application Considerations: Flange Should Be Mounted To Another Bearing Supported Element Or Rigid Plate If Used As A Holding Brake
- If Mounting A Pulley, Sprocket, Coupling, Or Putting Moment Loads On Output See The 5H##P Series
- No Misalignment Capability
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 25.1 lbs |
|---|---|
| Min Sprocket Size | Not Allowed |
| Mounting Style | Shaft |
| Anti Rotation Style | Flange |
| Engagement Method | Spring |
| Release Method | Air |
| Number Of Engagement Positions | 137 |
| Max Speed | 1200 RPM |
| Drive Inertia | 76.31 kgcm² |
| Shaft Inertia | 24.42 kgcm² |
| Backlash | 0.28 ° |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 0 °C |
| Max Ambient Temperature | 66 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Input Shaft Securement | None, Requires Customer Supplied Collars, Shaft Step And/Or Snap Ring Grooves |
| Max Static Clutch Torque | 412.4 Nm |
| Max Operating Pressure | 6.3 bar |
| Min Release Pressure | 6.2 bar |
| Inlet Size | 0.125-27 NPTM |
| Hose Length | N/A |
| Positioning | Non-Positioning |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Machined Aluminum Air Chamber Black Oxide Pilot |
| Output Configuration | Flange |
Dimensions
| Length | 93.5 mm |
|---|---|
| Outer Diameter | 184.2 mm |
| Pilot Size | 3.741 in |
| Bore Size | 40 mm, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Input Keyway | 12W x 92.0L mm |
| Output Bolt Circle Diameter | 5.187 in |
| Output Bolt Hole Size | 4 0.250-20 in, Holes @ 90° |
Notes
| Product Features | Spring Engaged, Air Released, Flange Mount, Non-Positioning |
|---|---|
| Restrictions | Consult Nexen For Use In Cyclic Applications Or Engagement At Differential Speeds |
Required Components
