WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 910258 Product Family 5H 45P-E
Air Engaged Tooth Clutch
Description
5H45P-E*1.500 BORE,PILOT,SEALED,SPCL
Product Features
Air Engaged, Spring Released, Pilot Mount, Non-Positioning, Enclosed
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special With Additional O-Ring To Seal Pilot Flange To Enclosure Shell And Additional Seals Over Hub End Bearings, Not Fully Nickel Plated, Higher IP Rating Assumed But Not Tested For, Set Screw Provisions Only On Air Chamber End
- The Enclosure Seal On Outer Housing Can Generate Up To 200°F When New Depending On The 5HP-E Size And RPM. Time To Break In And Temperature To Drop Will Vary With Application.
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 23.75 lbs |
|---|---|
| Min Sprocket Size | 40/36T, 50/30T, 60/26T, 80/20T, 100/17T |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 137 |
| Max Speed | 1200 RPM |
| Drive Inertia | 29.03 lbin² |
| Shaft Inertia | 10.01 lbin² |
| Backlash | 0.28 ° |
| Open Or Enclosed Design | Enclosed |
| Primary Finish | Nickel Plated |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| IEC IP Rating | IP55 |
| Bore Details | Straight |
| Input Shaft Securement | 3, Set Screws @ 120° On Air Chamber End Only |
| Max Static Clutch Torque | 4900 inlb |
| Min Static Clutch Torque | 1230 inlb |
| Max Allowable Pressure | 120 psi |
| Max Operating Pressure | 80 psi |
| Min Engagement Pressure | 20 psi |
| Air Chamber Volume | 0.763 in³ |
| Inlet Size | 0.125-27 NPTM |
| Hose Length | 8.25 in |
| Positioning | Non-Positioning |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Nickel Plated |
| Output Configuration | Pilot |
Dimensions
| Length | 5.24 in |
|---|---|
| Outer Diameter | 6.66 in |
| Pilot Size | 4.125 in |
| Bore Size | 1.500 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Output Bolt Circle Diameter | 4.75 in |
| Output Bolt Hole Size | 4 0.250-20 in, Holes @ 90° |
Notes
| Product Features | Air Engaged, Spring Released, Pilot Mount, Non-Positioning, Enclosed |
|---|---|
| Restrictions | Consult Nexen For Use In Cyclic Applications Or Engagement At Differential Speeds |
Required Components
