WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 910462 Product Family 5H 60P
Air Engaged Tooth Clutch
Description
5H60P-1*50MM BORE,PILOT,METRIC,SPCL
Product Features
Air Engaged, Spring Released, Pilot Mount, Non-Positioning
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: This Unit Has Tapped Hole Provisions On Both Ends Of The Hub, Has No Keyway, And Has Reduced Torque Rating Because Of This
- Application Considerations: Pilot Mount That Accepts Pulleys, Sprockets, Couplings, And Other Radial Loads
- Nexen Does Not Offer Couplings For Metric 5H's, See Inch 5H's With A Metric Bore
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 32.3 lbs |
|---|---|
| Min Sprocket Size | 50/38T, 60/32T, 80/25T, 100/21T, 120/19T |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 183 |
| Max Speed | 2400 RPM |
| Drive Inertia | 276.12 kgcm² |
| Shaft Inertia | 80.07 kgcm² |
| Backlash | 0.23 ° |
| Open Or Enclosed Design | Open |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 0 °C |
| Max Ambient Temperature | 66 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Max Static Clutch Torque | 770 Nm |
| Min Static Clutch Torque | 350 Nm |
| Max Operating Pressure | 2.8 bar |
| Min Engagement Pressure | 1.4 bar |
| Air Chamber Volume | 23.761 cm³ |
| Inlet Size | 0.250-18 BSPTM |
| Hose Length | 222 mm |
| Positioning | Non-Positioning |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Machined Aluminum Air Chamber Black Oxide Pilot |
| Output Configuration | Pilot |
Dimensions
| Bore Size | 50 mm, Machined Bore with Keyway |
|---|---|
| Bore Size | Machined Bore with Keyway |
Notes
| Product Features | Air Engaged, Spring Released, Pilot Mount, Non-Positioning |
|---|---|
| Restrictions | Do Not Exceed 2.8 Bar Air Pressure, Grade 8 Or Stronger M6 Hub Mounting Screws Torqued To 14.7 Nm Required |
Required Components
