WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 927214 Product Family STC 600
Multi-Actuator Tension Clutch
Description
STC600*1.125 BORE,SPCL
Product Features
Air Engaged, Straight Bore, Shaft Mount, Pilot Output, Multiple Actuators
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special With Precision Friction Interface (Friction Disc And Drive Disc With Mounted Friction Facing Machined To Reduce Runout ), Hub With Keyway Instead Of Spline, And Reduced Friction Facing Width To Increase Friction Interface Pressure All Of This Contributing To Less Stick/Slip At Low Air Pressures And RPM'S
- Application Considerations: Three Sets Of Different Sized Actuators Provide Wide Range Of Tension Control
- Facing Life And Peak Energy Input Reduced 73%
- If Friction Facing Wears Out Use The Repair Kit To Restore Original Performance, The Facing Kit Alone May Increase Pulsations
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 18 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 35/52T, 40/39T, 50/31T |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Max Speed | 1800 RPM |
| Drive Inertia | 18.72 lbin² |
| Shaft Inertia | 19.15 lbin² |
| Open Or Enclosed Design | Open |
| Primary Finish | Bare Aluminum |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Max Dynamic Torque | 525 inlb |
| Clutch Facing Type | Standard Coefficient |
| Clutch Facing Edge Color Code | Red |
| Approximate Clutch Facing Life | 216 hphr |
| Clutch Facing Effective Area | 4.03 in² |
| Max Clutch Continuous Thermal Dissipation | 1.10 hp |
| Clutch Peak Thermal Input Rate | 8.00 hp |
| Max Number Of Calipers | 3 |
| Max Dynamic Torque With Small Pistons | 105 inlb |
| Max Dynamic Torque With Medium Pistons | 180 inlb |
| Max Dynamic Torque With Large Pistons | 240 inlb |
| Max Dynamic Torque With All Calipers | 525 inlb |
| Operating Range | 1-85 psi |
| Inlet Size | 0.125 NPT, Or 5/32 in Plastic Tubing |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Machined Aluminum |
| Output Shaft Style | None |
Dimensions
| Length | 6.78 in |
|---|---|
| Outer Diameter | 6.00 in |
| Pilot Size | 3.500 in |
| Bore Size | 1.125 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Output Bolt Circle Diameter | 4 in |
| Output Bolt Hole Size | 6 0.250-20 in, Holes @ 60° |
Notes
| Product Features | Air Engaged, Straight Bore, Shaft Mount, Pilot Output, Multiple Actuators |
|---|
Required Components
