WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 927265 Product Family STC 600
Multi-Actuator Tension Clutch
Description
STC600*1.125 BORE,SPCL
Product Features
Air Engaged, Straight Bore, Shaft Mount, Pilot Output, Multiple Actuators
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special STC940 Rotor And Drive Disc With Quick Change Facing With Precision Interface And STC600 Pilot And Air Chamber, Exclusive For Mark Andy
- Application Considerations: Three Sets Of Different Sized Actuators Provide Wide Range Of Tension Control
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 36.6 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 35/52T, 40/39T, 50/31T |
| Mounting Style | Shaft |
| Engagement Method | Air |
| Release Method | Spring |
| Max Speed | 1800 RPM |
| Drive Inertia | 18.72 lbin² |
| Shaft Inertia | 104.4 lbin² |
| Open Or Enclosed Design | Open |
| Primary Finish | Bare Aluminum |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Max Dynamic Torque | 590 inlb |
| Clutch Facing Type | Low Coefficient |
| Clutch Facing Edge Color Code | Green |
| Approximate Clutch Facing Life | 4500 hphr |
| Clutch Facing Effective Area | 44.93 in² |
| Max Clutch Continuous Thermal Dissipation | 3.00 hp |
| Clutch Peak Thermal Input Rate | 41.00 hp |
| Max Number Of Calipers | 3 |
| Max Dynamic Torque With Small Pistons | 111 inlb |
| Max Dynamic Torque With Medium Pistons | 188 inlb |
| Max Dynamic Torque With Large Pistons | 284 inlb |
| Max Dynamic Torque With All Calipers | 590 inlb |
| Operating Range | 1-85 psi |
| Inlet Size | 0.125 NPT, Or 5/32 in Plastic Tubing |
| Bore Style | Machined Bore with Keyway |
| Materials Of Construction | Machined Aluminum |
| Output Shaft Style | None |
Dimensions
| Length | 6.78 in |
|---|---|
| Outer Diameter | 6.00 in |
| Pilot Size | 3.500 in |
| Bore Size | 1.125 in, Machined Bore with Keyway |
| Bore Size | Machined Bore with Keyway |
| Output Bolt Circle Diameter | 4 in |
| Output Bolt Hole Size | 6 0.250-20 in, Holes @ 60° |
Notes
| Product Features | Air Engaged, Straight Bore, Shaft Mount, Pilot Output, Multiple Actuators |
|---|---|
| Restrictions | Should Only Be Used In Horizontal Shaft Applications And Purchased Through Mark Andy Due To Possible Hazzard Of Friction Facings Flying Out If Screws Fail |
Required Components
