WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 951309 Product Family TL 40-A
Air Engaged Torque Limiter
Description
TL40A*NO HUB,SEMI-ASSY,METRIC,SPCL
Product Features
Air Engaged, Shaft Mount, Straight Bore, Single Position
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special Unassembled Without Hub, Set Screws, Or Bearings, For Asahi
- Application Considerations: Now Improved With Turck™ Proximity Sensor (Click User Manual In Left Column For Installation Details)
- Positional Reengagement Torque Is Approximately 10% Of Clutch Torque Being Generated Based On Applied Air Pressure
- Nexen Does Not Offer Couplings For Metric TL's, See Inch TL's With A Metric Bore
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 19.8 lbs |
|---|---|
| Output Type | Pilot |
| Min Sprocket Size | 40/40T, 50/30T, 60/26T, 80/20T |
| Engagement Method | Air |
| Release Method | Spring |
| Number Of Engagement Positions | 5, @ 72° |
| Max Speed | 1350 RPM |
| Drive Inertia | 160.13 kgcm² |
| Shaft Inertia | 73.74 kgcm² |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | 0 °C |
| Max Ambient Temperature | 66 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Bore Details | Straight |
| Max Operating Pressure | 6.0 bar |
| Min Engagement Pressure | 1.0 bar |
| Inlet Size | 0.125 NPT |
| Hose Length | 209.5 mm |
| Cable Length | 2 m |
| Number of Sensors | 1 |
| Housing Type | Open |
| Bore Style | Unfinished Blank Bore |
| Clutch Air Chamber Volume When New | 25.564 cm³ |
| Materials Of Construction | Bare Machined Aluminum Air Chamber Black Oxide Pilot |
| Sensor Function | Disengagement |
| Sensor 1 Function | Disengagement |
| Sensor 1 Output | Normally Open PNP |
| Sensor 1 Type | Inductive Proximity |
| Min Disengagement Torque | 102 Nm |
| Max Disengagement Torque | 500 Nm |
Dimensions
| Bore Size | 0 mm, Blank Bore can be finished up to 42 mm |
|---|---|
| Bore Size | Blank Bore can be finished up to 42 mm |
Notes
| Product Features | Air Engaged, Shaft Mount, Straight Bore, Single Position |
|---|---|
| Restrictions | Consult Nexen For Engagement at Differential Speeds |
Required Components
