WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 964647 Product Family SBP 02
Spring Engaged Servomotor Brake
Description
SBP2-0.375-NEMA23-0.375-NO-STD,SPCL
Product Features
Spring Engaged, Zero Backlash, Flange Mount, Input Clamp Collar, Sensors
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Reduced Torque And Release Pressure, Has Sensors For Engaged Disengaged And Worn Out Friction Facing, Not NexSafe Rated
- Does Not Include A Quick Exhaust Valve, See Accessories
- For Control Valves, See Accessories
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 2 lbs |
|---|---|
| Mounting Style | Motor or Reducer |
| Anti Rotation Style | Flange |
| Engagement Method | Spring |
| Release Method | Air |
| Max Speed | 10000 RPM |
| Overhung Load Capacity | 833 N, At 10,000 RPM, 15 mm From Pilot Face, For A 10,000 Hr Bearing Life |
| Shaft Inertia | 0.00002 kgm² |
| Torsional Rigidity | 2700 Nm/Rad |
| Backlash | 0 ArcSec |
| Open Or Enclosed Design | Enclosed |
| Primary Finish | Bare Aluminum |
| Static b10/b10d Cycle Life | 1000000/2000000 |
| Min Ambient Temperature | 32 °F |
| Max Ambient Temperature | 150 °F |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| IEC IP Rating | IP67 |
| Input Frame Size | NEMA 23 |
| Output Frame Size | N/A |
| Bore Details | Straight Bore/Shaft |
| Input Shaft Securement | Clamp Collar |
| Output Shaft Features | 2 Flats @ 90° |
| Min Static Brake Torque | 10.2 inlb |
| Approximate Engagement Response Time | 8 ms |
| Approximate Release Response Time | 92 ms |
| Max Allowable Pressure | 8.3 bar |
| Min Release Pressure | 40 psi |
| Air Chamber Volume | 3.160 cm³ |
| Inlet Size | 0.125 NPT |
| Sensor Connector | Flying Leads |
| Number of Sensors | 3 |
| Sensor Location | Air Inlet Side |
| Safety Rating | Standard |
| Bore Style | Machined Bore with Clamp Collar and no Keyway |
| Materials Of Construction | Bare Aluminum |
| Output Shaft Style | Shaft without Keyway |
| Sensor Function | Disengagement, Engagement, Facing Wear |
| Sensor 1 Function | Engagement, Integral, factory set |
| Sensor 1 Output | Normally Open PNP |
| Sensor 1 Type | Inductive Proximity |
| Sensor 3 Function | Facing Wear, Integral, factory set |
| Sensor 3 Output | Normally Open PNP |
| Sensor 3 Type | Inductive Proximity |
| Sensor 2 Function | Disengagement, Integral, factory set |
| Sensor 2 Output | Normally Open PNP |
| Sensor 2 Type | Inductive Proximity |
| Backlash Rating | Zero Backlash |
Dimensions
| Length | 4.02 in |
|---|---|
| Body Length | 2.77 in |
| Bore Size | Machined Bore with Clamp Collar and no Keyway |
| Input Bore Diameter | 0.375 in |
| Input Keyway | N/A |
| Output Shaft Diameter | 0.375 in |
| Output Shaft Length | 1.25 in |
| Output Keyway | N/A |
| Input Bolt Circle Diameter | 2.625 in |
| Input Bolt Hole Size | #10-24, 0.38 Deep |
| Input Pilot Diameter | 1.500 in |
| Input Pilot Depth | 0.09 in |
| Output Pilot Diameter | 46 mm |
| Output Pilot Height | 0.063 in |
| Output Bolt Circle Diameter | 2.625 in |
Notes
| Product Features | Spring Engaged, Zero Backlash, Flange Mount, Input Clamp Collar, Sensors |
|---|---|
| Restrictions | Not Recommended For Cyclic Dynamic Braking |
| Braking Capability | E-Stop, Holding |
Required Components
