WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 966017 Product Family RLSS 080-025
Spring Engaged Stand Alone Rod Lock
Description
RLSS*080-025-S-A,SPCL*OBS
Product Features
Spring Engaged, Metric Guide Rod Mount
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special For F8 Shafting With H8 Shaft Tolerance, No Housing Grooves, Tapped Mounting Holes On Both Ends, Black Anodized
- Application Considerations: Spring Engaged, Very Low Backlash, IP67 Rated, Extremely Low Rod Displacement On Engagement, Compact
- Mounting Hardware Not Provided
- Multiple Springs For More Reliable Holding Performance
- Can Be Used For Infrequent Dynamic E-Stops. Multiple Cylinder Mount Rod Locks Can Be Stacked On This Unit For Higher Holding Forces.
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 6 lbs |
|---|---|
| Mounting Style | Stand Alone |
| Engagement Method | Spring |
| Release Method | Air |
| Backlash | 0.051 - 0.127 mm, Proportional To Load |
| Open Or Enclosed Design | Enclosed |
| Primary Finish | Black Anodized |
| Static b10/b10d Cycle Life | 1000000/2000000 |
| Min Ambient Temperature | 0.5 °C |
| Max Ambient Temperature | 60 °C, Continuous |
| Max Intermittent Ambient Temperature | 100 °C, Intermittent |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| IEC IP Rating | IP67 |
| Manual Release Feature | No |
| Approximate Engagement Response Time | 60 ms |
| Max Operating Pressure | 6.9 bar |
| Min Release Pressure | 5.5 bar |
| Air Chamber Volume | 24.200 cm³ |
| Inlet Size | 0.250 BSPP |
| Linear Holding Force | 3560 N |
| Rod Requirements | HRC60 Or Hard Chrome Plated Minimum Of 20 Microns, h8 Tolerance, Roughness 1.6 Microns |
| Safety Rating | Standard |
| Materials Of Construction | Black Anodized |
| Number of Slots for Operating Mode Sensors | No Sensor Slot, No sensor option |
Dimensions
| Length | 115.5 mm |
|---|---|
| Rod Diameter | 25 mm |
Notes
| Product Features | Spring Engaged, Metric Guide Rod Mount |
|---|---|
| Restrictions | Not For Use In Cyclic Dynamic Stopping Applications, Rod Rotation Not Allowed When Locked, Consult Nexen For Use In Wash-Down Or Humid Applications |
Required Components
Accessories
