Product Number 966274 Product Family RLSSB 125-032

Spring Engaged Stand Alone Rod Lock

Description

SAFE-RLSSB*125-032-S-A-2PNP2-M12

Product Features

Safety Rated, Spring Engaged, Metric Guide Rod Mount, Mode Sensors

Please log in to see prices!
Stock: In stock

WARNING: California Proposition 65

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

PDF CAD Drawing STEP CAD File DXF CAD Drawing Technical Data Sheet Product Flyer Application Guide User Manual

Important Details

  • Application Considerations: Spring Engaged, Very Low Backlash, IP67 Rated, Extremely Low Rod Displacement On Engagement, Compact, NexSafe Certified Safety Product
  • Mounting Hardware Not Provided
  • Multiple Springs For More Reliable Holding Performance
  • Includes Locking Mode Sensors For Control System Feedback That Can Reach CAT4 Safety Certification With Two Rod Locks Or A Redundant Holding Device
  • Can Be Used For Infrequent Dynamic E-Stops. Multiple Cylinder Mount Rod Locks Can Be Stacked On This Unit For Higher Holding Forces.

 

Specifications

Specifications
Weight 21 lbs
Mounting Style Stand Alone
Engagement Method Spring
Release Method Air
Backlash < 0.20 mm
Open Or Enclosed Design Enclosed
Primary Finish Black Anodized
Static b10/b10d Cycle Life 1000000/2000000
Min Ambient Temperature 0.5 °C
Max Ambient Temperature 65.5 °C, Continuous
CE Certified CE
RoHS Compliant RoHS
IEC IP Rating IP67
Manual Release Feature No
Approximate Engagement Response Time 130 ms
Max Operating Pressure 8 bar
Min Release Pressure 4.1 bar
Air Chamber Volume 163.700 cm³
Inlet Size 0.250 BSPP
Cable Length 0.3 m
Input Power 10-30 VDC
Sensor Connector M12 x 1.0 Male
Number of Sensors 2
Sensor Location Both Sides
Sensor Frequency ≤ 1000 Hz
Linear Holding Force 8560 N
Rod Requirements HRC60 Or Hard Chrome Plated Minimum Of 20 Microns, h8 Tolerance, Roughness 1.6 Microns
Safety Rating NexSafe Certified
Materials Of Construction Black Anodized
Sensor Function Disengagement, Engagement, Engagement or Disengagement
Sensor 1 Function Engagement or Disengagement, Depends on user installation
Sensor 1 Output Normally Open PNP
Sensor 1 Type Magneto-Resistive
Sensor 2 Function Engagement or Disengagement, Depends on user installation
Sensor 2 Output Normally Open PNP
Sensor 2 Type Magneto-Resistive
Number of Slots for Operating Mode Sensors 2 Sensor Slots, 2 Sensors included

Dimensions

Dimensions
Length 174.5 mm
Rod Diameter 32 mm

Notes

Notes
Product Features Safety Rated, Spring Engaged, Metric Guide Rod Mount, Mode Sensors
Restrictions Not For Use In Cyclic Dynamic Stopping Applications, Rod Rotation Not Allowed When Locked, Consult Nexen For Use In Wash-Down Or Humid Applications