WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 966962 Product Family PRD 750-PL
Guarded Housing Rotary Indexer
Description
PRD750,PL,550:1,24.00,50.00,130.00,90 DEG,LG,SPCL
Product Features
Freely Programable, High Precision, Low Backlash, High Capacity Bearing, Guarded Housing, With 90 Degree Planetary Gearhead
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Right Angle Reducer Pointing Out, Pinion Has Vacuum Grease, No Ring Gear Tooth Grease, Vacuum Spec Reducer, Thicker Mounting Plate For Higher Moment Loads
- Application Considerations: Guard open over pinion
- Consists Of A RPG Gear, Cross Roller Bearing, Mounting Plate, Pinion, Preloader, Reducer, And Guard
- The System Is Factory Aligned And Preloaded
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 690 lbs |
|---|---|
| Output Type | Dial Plate Bolt Pattern with Pilot |
| Primary Finish | Black Oxide |
| Min Ambient Temperature | -5 °C |
| Max Ambient Temperature | 40 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Input Shaft Securement | Clamp Collar |
| Max Static Torque | 1926 Nm |
| Max Acceleration Torque | 1751 Nm |
| Nominal Torque | 985 Nm |
| One Way Repeatability | ± 2.4 ArcSec |
| Angular Backlash | < 20.7 ArcSec |
| Max Output Speed | 9.1 RPM |
| Total Ratio | 550.0 :1 |
| Approximate Life | 5454545, Output Revolutions at Nominal Output Torque, See Charts in Technical Data Sheet |
| Housing Type | Guarded |
| Gear To Pinion Ratio | 11.0 :1 |
| Gearhead Style | Planetary, Right Angle |
| Drive Station Style | Gearhead Mounted |
| Gearhead Ratio | 50.0 :1 |
| Materials Of Construction | Bare Steel And Black Oxide |
| Max Continuous Output Speed | 4.5 RPM |
| One Way Positional Accuracy | ± 33.7 ArcSec |
| Backlash Rating | Has Backlash |
Dimensions
| Outer Diameter | 900.0 mm |
|---|---|
| Open Center Diameter | 550 mm |
| Pilot Size | 770 mm |
| Shaft Length | 50 mm |
| Input Shaft Diameter | 22 mm |
| Input Keyway | N/A |
| Input Bolt Circle Diameter | 165 mm |
| Input Bolt Hole Size | M10 |
| Input Pilot Diameter | 130 mm |
| Input Pilot Depth | 3.5 mm |
Notes
| Product Features | Freely Programable, High Precision, Low Backlash, High Capacity Bearing, Guarded Housing, With 90 Degree Planetary Gearhead |
|---|
Accessories
