WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 967005 Product Family RPS 20G
Roller Pinion Gear
Description
RPS20G-B0044T/360-IP6U,SPCL
Product Features
High Precision, Zero Backlash, Full Ring Gear, Internal Tooth, Lube Free Operation Possible
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Configuration Notes: Special Mounting Flange, Overall System Performance Will Depend On The Lesser Of The Gear And Pinion Combination
- Total System Performance Will Be The Lesser Of The Pinion And Rack Or Gear Combination
- To Assemble Full Segmented Rings An Alignment Tool Is Required For Every Joint, To Join Segments Only One Is Needed
- Includes Single RPG Gear Segment, See Pinion Options Under Accessories
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 15.45 lbs |
|---|---|
| Primary Finish | Dense Hard Chrome |
| Min Ambient Temperature | -5 °C |
| Max Ambient Temperature | 40 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Max Static Torque | 420.0 Nm |
| Max Dynamic Torque At Min Life | 406.0 Nm |
| Max Dynamic Torque For Max Life | 231.0 Nm |
| Product Weight | 6.5 kg |
| One Way Repeatability | ± 7.6 ArcSec |
| Angular Backlash | 0 ArcSec |
| Max Output Speed | 273 RPM |
| Rotational Inertia | 0.17 kgm² |
| Tooth Orientation | Internal Teeth |
| Approximate Life | More Than 30000000, Roller Contacts Per Tooth At Rated Accuracy And Max Life Ratings |
| Gear To Pinion Ratio | 4.4 :1 |
| Gear Or Segment Angle | 360 ° |
| Materials Of Construction | Grey Thin Dense Hard Chrome On Steel |
| One Way Positional Accuracy | ± 46 ArcSec |
| RPS Size | 20 |
| RPS Width | B-Width, Only Compatible with B-Width Roller Pinions |
| Backlash Rating | Zero Backlash |
Dimensions
| Length | 1.50 in |
|---|---|
| Outer Diameter | 378.5 mm |
| Inner Diameter | 254 mm |
| Ring Gear Mounting Flange Thickness | 15.5 mm |
| Output Bolt Circle Diameter | 356.87 mm |
| Output Bolt Hole Size | 15 6.2 mm, Thru |
| Center To Center Distance | 105.0 mm, Approximate |
Notes
| Product Features | High Precision, Zero Backlash, Full Ring Gear, Internal Tooth, Lube Free Operation Possible |
|---|---|
| Restrictions | This Gear Can Run Without Lubrication At Speeds Below 39 RPM With Some Potential Life Reduction |
Required Components
Accessories
