WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Number 967067 Product Family RPS 32G
Roller Pinion Gear Segment
Description
RPS32G-B0180T/036-EP5U
Product Features
High Precision, Zero Backlash, Gear Segment, External Tooth, Lube Free Operation Possible
Stock: In stock
WARNING: California Proposition 65
Resources
Important Details
- Application Considerations: The Full Torque Rating Of This Gear Can Only Be Obtained With Pinion 966723 or 966680, Other Pinions Will Be The Limiting Factor On Torque Rating
- To Assemble Full Segmented Rings An Alignment Tool Is Required For Every Joint, To Join Segments Only One Is Needed
- Includes Single RPG Gear Segment, See Pinion Options Under Accessories
Have a question
about a product or application?
Contact our Engineers
Specifications
| Weight | 20.1 lbs |
|---|---|
| Primary Finish | Black Oxide |
| Min Ambient Temperature | -5 °C |
| Max Ambient Temperature | 40 °C |
| CE Certified | CE |
| RoHS Compliant | RoHS |
| Max Static Torque | 17250 Nm |
| Max Dynamic Torque At Min Life | 9623 Nm |
| Max Dynamic Torque For Max Life | 5499 Nm |
| Product Weight | 7.5 kg, Per Segment |
| One Way Repeatability | ± 1.3 ArcSec |
| Angular Backlash | 0 ArcSec |
| Max Output Speed | 62.5 RPM |
| Rotational Inertia | 5.3 kgm², Per Segment |
| Tooth Orientation | External Teeth |
| Approximate Life | More Than 30000000, Roller Contacts Per Tooth At Rated Accuracy And Max Life Ratings |
| Gear To Pinion Ratio | 15 :1 |
| Full Ring Possible | Can Create Full Ring |
| Gear Or Segment Angle | 36 ° |
| Materials Of Construction | Black Oxide On Steel |
| One Way Positional Accuracy | ± 7.1 ArcSec |
| RPS Size | 32 |
| RPS Width | B-Width, Only Compatible with B-Width Roller Pinions |
| Backlash Rating | Zero Backlash |
Dimensions
| Length | 28.50 in |
|---|---|
| Outer Diameter | 1780 mm |
| Inner Diameter | 1600.6 mm |
| Ring Gear Mounting Flange Thickness | 24.5 mm |
| Input Bolt Hole Size | 16.75 mm, Thru, With 25.50OD X 16.8DP Counter Sink |
| Mounting Bolt Circle Diameter | 1650 mm, At 6° |
| Center To Center Distance | 935 mm |
Notes
| Product Features | High Precision, Zero Backlash, Gear Segment, External Tooth, Lube Free Operation Possible |
|---|---|
| Restrictions | This Gear Can Run Without Lubrication At Speeds Below 5.2 RPM With Some Potential Life Reduction |
Required Components
Accessories
